【SUMMAARY 】

Ovulation is the release of an egg from the ovary. The egg then passes into the fallopian tube where it is ready to be fertilized. Immediately prior to ovulation, the body produces a large amount of luteinizing hormone (LH) which triggers the release of a ripened egg from the ovary.

【DIRECTIONS FOR USE 】

Determine the day you will begin testing using the “When to Start Testing Chart”.

1. Allow the test, urine specimen and/or controls to reach room temperature (15-30 °C) prior to testing.

2. Bring the pouch to room temperature before opening it. Remove the Strip test from the sealed pouch and use it within one hour.

3. With arrows pointing toward the urine specimen, immerse the test Strip vertically in the urine specimen for at least 10-15 seconds. Do not pass the maximum

line (MAX) on the test Strip when immersing the Strip. See illustration below.

4. Place the test Strip on a non-absorbent flat surface, start the timer and wait for the colored line(s) to appear. Read results at 5 minutes. Do not interpret the result after 10 minutes.

【DIRECTIONS FOR USE】

Determine the day you will begin testing using the “When to Start Testing Chart”.

1. Allow the test, urine specimen and/or controls to reach room temperature (15-30 °C) prior to testing.

2. Bring the pouch to room temperature before opening it. Remove the Cassette test from the sealed pouch and use it within one hour.

3. Place the test cassette on a clean and level surface. Hold the sample dropper vertically and transfer 3 drops of urine （approx.120ul）to the specimen well of the test

cassette, and then start the timer. Avoid trapping air bubbles in the specimen well. See illustration below.

4. Wait for the colored line(s) to appear. Read the result at 5 minutes. Do not interpret the result after 10 minutes.